manualshive.com logo in svg

Garmin G1000 Columbia 350, Руководство по эксплуатации кабины

Поделиться
Скачать
Garmin G1000 Columbia 350 Скачать руководство пользователя страница 26

Garmin G1000 Cockpit Reference Guide for the Columbia 350/400

190-00567-01  Rev. A

1-12

SECTION 1 

SYSTEM OVERVIEW

1.6  VERTICAL NAVIGATION

In  WAAS  capable  installations,  one  of  two  altitude 

sources  is  used  by  the  G1000  when  giving  vertical 
navigation guidance.  WAAS GPS altitude is used when 
giving  guidance  for  a  WAAS  approach.    Baro  corrected 
altitude is used when vertical guidance is given in all other 
situations and in non-WAAS systems.

The  G1000  system  can  use  altitude  constraints 

associated  with  lateral  waypoints  to  give  guidance  for 
vertical navigation.  These altitudes are, depending on the 
specific instance, entered by the pilot or retrieved from the 
published altitudes in the navigation database.

The  navigation  database  only  contains  altitudes 

for  procedures  that  call  for  “Cross  at”  altitudes.    If  the 
procedure states “Expect to cross at,” then the altitude will 
not be in the database.  In this case the altitude may be 
entered manually.

 

NOTE:  

All arrival procedure altitudes contained in 

the navigation database are for turbojet aircraft only.  
Alter or enter altitudes as desired to comply with the 
ATC clearance.

When  activating  or  loading  an  arrival  or  approach  

procedure into an active flight plan, the VNV ‘ALT’ fields 
will be populated with any altitudes that can be retrieved 
from the navigation database.

Since  altitudes  loaded  with  an  arrival  procedure  are 

published  only  for  turbojet  aircraft,  the  altitudes  are 
displayed  as  white  text  indicating  that  the  altitudes  are 
displayed for reference only.  An arrival waypoint altitude 
may  be  used  (or  “designated”)  as  is,  or  changed  to  a 
different altitude.  An altitude is designated by pressing the 

FMS

 Knob and turning the large 

FMS

 Knob to place the 

cursor on the desired altitude and pressing the 

ENT

 Key or 

entering a different value and pressing the 

ENT

 Key.  The 

altitude will now be displayed as light blue text, indicating 
that the altitude is now designated to give vertical speed 
and deviation guidance.

Approach waypoint altitude constraints are automatically 

designated  for  use  when  the  approach  is  loaded.    These 
altitudes will be displayed as light blue text indicating the 
altitudes  will  be  used  in  vertical  guidance  calculations.  
Waypoint altitude constraints may be designated up to, but 
not including the FAF.  The FAF will always be a “reference 
only” altitude and cannot be designated, unless the selected 
approach does not provide vertical guidance.  In this case, 
the FAF altitude can be designated.

Altitudes that have been designated for use in vertical 

guidance may also be made “non-designated” by placing the 
cursor over the desired altitude and pressing the 

CLR

 Key.  

Other displayed altitudes may change due to re-calculations 
or  rendered  invalid  as  a  result  of  manually  changing  an 
altitude to a non-designated altitude.

To help interpret the meanings of how the altitudes are 

presented, keep the following points in mind:

•  When  the  altitude  is  displayed  in  light  blue, 

the  system  is  using  that  altitude  (designated)  to 
determine vertical speed and deviation guidance.

•  When the altitude is displayed in white, it is not being 

used by the system (non-designated) to determine 
the vertical speed and deviation guidance.

•  An altitude displayed as small text is an altitude that 

is published in the navigation database.

•  Altitudes  displayed  as  a  light  blue  subdued  text 

cannot be used in the current vertical navigation 
calculations.

Содержание G1000 Columbia 350

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды