![Garmin FUSION SG-DA82000 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/garmin/fusion-sg-da82000/fusion-sg-da82000_installation-instructions-manual_564988013.webp)
Adjusting the Level for a Zone
NOTE: The level setting is music dependent, and not all levels are appropriate for all types of music. For
example, if you adjust the level setting for rock music, then listen to classical music, it could result in distortion
due to clipping.
1 Using a flat screwdriver, adjust the LEVEL dial for the zone to MIN by turning the dial counter-clockwise.
2 Begin playing audio on the stereo, and set the zone line out to approximately
3
/
4
volume.
3 Slowly adjust the LEVEL dial for the zone clockwise toward the MAX setting while listening to the speakers
connected to that zone.
4 When the sound from the speakers becomes distorted, stop adjusting the dial, and slowly adjust the dial
counter-clockwise again until the distortion is gone.
5 Repeat this procedure for the other zones.
Configuring the Amplifier for a DSP Compatible Stereo
If your stereo features digital signal processing (DSP), such as a Fusion Apollo RA770, you should use the
Fusion-Link app when configuring the amplifier for the best results.
1 Follow the instructions in your stereo owner's manual to download the Fusion-Link app and connect it to the
stereo.
2 Select the appropriate stereo, amplifier, and speakers in the Fusion-Link app.
3 Follow the instructions in the Fusion-Link app to adjust the configuration controls on the amplifier.
13