Garmin Forerunner 735XT, Руководство пользователя, Страница: 71 / 341

70 Forerunner
®
735XT
EN
the sensor is active and within range.
NOTE: If your device was packaged with an
ANT+ sensor, they are already paired.
1 Install the sensor or put on the heart rate
monitor.
2 Bring the device within 1 cm of the sensor,
and wait while the device connects to the
sensor.
When the device detects the sensor, a mes-
sage appears. You can customize a data
field to display sensor data.
3 If necessary, select Menu > Settings >
Sensors and Accessories to manage
ANT+ sensors.
Foot Pod
Your device is compatible with the foot pod.
You can use the foot pod to record pace and
distance instead of using GPS when you are
training indoors or when your GPS signal is
weak. The foot pod is on standby and ready to
send data (like the heart rate monitor).
After 30 minutes of inactivity, the foot pod
powers off to conserve the battery. When the
battery is low, a message appears on your
device. Approximately five hours of battery life
remain.
Going for a Run Using a Foot Pod
Before you go for a run, you must pair the foot
pod with your Forerunner device
(Pairing ANT+
Sensors, page 69) .
You can run indoors using a foot pod to record
pace, distance, and cadence. You can also run