Fishfinder 160C Owner’s Manual
19
O
PERATING
I
NSTRUCTIONS
>
T
HE
S
ETUP
M
ENU
Calibrate Speed
This only appears if you are using a speed-capable transducer.
Calibration is required to ensure that the speed shown on your unit is
accurate. Use the boat’s speedometer, a stopwatch, or a GPS device
to determine your speed. If using a stopwatch, measure the distance
that the boat travels in a period of time (distance / time = speed). It
is recommended that the calibration take place in water having little
or no current.
To calibrate the speed:
1. Highlight
Calibrate Speed
, and press the
ENTER
key.
2. Bring the boat to cruising speed, note the top speed, and
then stop the boat.
3. With
OK
selected, press the
ENTER
key.
4. Using the
up
or
down Arrow
key, set the maximum speed,
and press the
ENTER
key.
NOTE:
If the boat is not moving fast enough or the speed sensor
is not registering a speed, you will see
Speed Too Low
displayed
in the selection box. With
OK
highlighted, press
ENTER
and
check that the speed sensor wheel is moving or safely increase
boat speed. If there is a problem with the speed sensor/unit,
check the cable connections.
Содержание Fishfinder 160C
Страница 1: ...Fish nder 160C color sonar owner s manual...
Страница 33: ......
