Garmin FENIX A03095, Руководство пользователя

Страница: 18 / 38

5
Select Sounds , and select a type of notification (optional).
6
Select Backlight > On to turn on the backlight with the alarm.
Starting the Countdown Timer
1 From the watch face, hold MENU .
2 Select Clock > Timer .
3
Enter the time.
4
If necessary, select Restart > On to automatically restart the
timer after it expires.
5
If necessary, select Sounds , and select a type of notification.
6 Select Start Timer .
Using the Stopwatch
1
From the watch face, hold MENU .
2
Select Clock > Stopwatch .
3
Select to start the timer.
4 Select DOWN to restart the lap timer
À
.
The total stopwatch time
Á
continues running.
5
Select to stop both timers.
6 Select DOWN to reset both timers.
Setting Sunrise and Sunset Alerts
You can set the sunrise and sunset alerts to sound a specific
number of minutes or hours before the actual sunrise or sunset
occurs.
1 From the watch face, hold MENU .
2
Select Clock > Alerts .
3
Select an option:
• Select
Til Sunset > Status > On .
• Select Til Sunrise > Status > On .
4
Select Time , and enter the time.
Syncing the Time with GPS
Each time you turn on the device and acquire satellites, the
device automatically detects your time zones and the current
time of day. You can also manually sync the time with GPS
when you change time zones, and to update for daylight saving
time.
1 From the watch face, hold MENU .
2 Select Clock > Sync With GPS .
3
Wait while the device locates satellites ( Acquiring Satellite
Signals , page 26 ).
Navigation
Projecting a Waypoint
You can create a new location by projecting the distance and
bearing from your current location to a new location.
1
If necessary, select > Add > Project Wpt. to add the
project waypoint app to the apps list.
2
Select Yes to add the app to your list of favorites.
3
From the watch face, select > Project Wpt. .
4
Select UP or DOWN to set the heading.
5
Select .
6
Select DOWN to select a unit of measure.
7
Select UP to enter the distance.
8
Select to save.
The projected waypoint is saved with a default name.
Saving Your Location
You can save your current location to navigate back to it later.
1
Hold LIGHT .
2
Select .
3
Follow the on-screen instructions.
Editing Your Saved Locations
You can delete a saved location or edit its name, elevation, and
position information.
1
From the watch face, select > Navigate > Saved
Locations .
2
Select a saved location.
3
Select an option to edit the location.
Deleting All Saved Locations
You can delete all of your saved locations at once.
From the watch face, select > Navigate > Saved
Locations > Delete All .
Navigating to a Destination
You can use your device to navigate to a destination or follow a
course.
1 From the watch face, select > Navigate .
2
Select a category.
3
Respond to the on-screen prompts to choose a destination.
4
Select Go To .
Navigation information appears.
5
Select to begin navigation.
Creating and Following a Course on Your
Device
1
From the watch face, select > Navigate > Courses >
Create New .
2 Enter a name for the course, and select .
3
Select Add Location .
4
Select an option.
5
If necessary, repeat steps 3 and 4.
6
Select Done > Do Course .
Navigation information appears.
7
Select to begin navigation.
Marking and Starting Navigation to a Man
Overboard Location
You can save a man overboard (MOB) location, and
automatically start navigation back to it.
TIP: You can customize the hold function of the keys to access
the MOB function ( Customizing the Hot Keys , page 23 ).
From the watch face, select > Navigate > Last MOB .
Navigation information appears.
14 Navigation