Garmin eTrex Vista Cx Скачать руководство пользователя страница 78

Страница: 78 / 112

Display Setup

Use the Display Setup Page to

select a screen color scheme for

day and night viewing. You can

set the backlight timeout and the

level of brightness to save on

battery power.

To access the Display Setup Page:

On the Setup Menu Page, highlight the

Display

icon, and press

Enter

• Display Mode

—sets the display to

Day

Night

Auto

mode. Select

Auto

to automatically

switch from day to night at sunset and change

back at sunrise.

• Daytime Color Scheme and Nightime Color

Scheme

—sets the color scheme to use when

operating in Day or Night mode.

• Backlight Timeout

—sets the backlight to stay

on when it is turned on, or to time out after a

selected period of time has elapsed when using

the battery. The backlight stays on regardless of

this setting when external power is used.

• Backlight Level

—turns the backlight up or

down. Press up on the

Rocker

to increase the

intensity or down to decrease.

Interface Setup

Use the Interface Setup Page

to transfer data to or from the

microSD card contained in your

unit.

To access the Interface

Setup Page:

On the Setup Menu Page, highlight the

Interface

icon, and press

ENTER

to display

the page. If the USB cable is connected to

a PC and the unit, a “Connected” message

appears on the page.

USB Mass Storage

—allows

the microSD card to be used as

a USB Mass Storage device. It

also allows transfer of Track Log

Data to Garmin MapSource and

detailed map data transfer.

eTrex Vista Cx Owner’s Manual

AIN

ENU

ETUP

ENU

Содержание eTrex Vista Cx

















































































































Результаты поиска

Содержание eTrex Vista Cx

Отзывы:

Garmin eTrex Vista Cx, Руководство пользователя, Страница: 78 / 112

Результаты поиска

Содержание eTrex Vista Cx

Отзывы: