eTrex Venture Cx and Legend Cx Owner’s Manual
13
B
ASIC
O
PERATION
>
C
REATING
AND
U
SING
W
AYPOINTS
To move a waypoint on the Map Page:
1. On the Find Menu, highlight the
Waypoints
icon, and press
Enter
to open the Waypoints
Page.
2. Select the waypoint you want to move, and
press
Enter
. The Waypoint Page opens.
3. Highlight the
Map
button, and press
Enter
to
show the waypoint on the map.
4. Press
Enter
again to place a
MOVE
marker
next to the waypoint.
5. Use the
Rocker
to move the waypoint to a
new location on the map, and press
Enter
.
Averaging the Waypoint’s Location
You can average a new waypoint location over time to
produce a more accurate location.
NOTE:
You must have a GPS satellite fix
before you can average a waypoint’s location.
You cannot average a waypoint after it has
been saved to the waypoints list and the Mark
Waypoint page is closed as there is no longer
satellite fix for that specific location.
To calculate the average location:
1. Press the
Find
key to open the Find Menu.
2. Highlight the
Waypoints
icon, and press
Enter
to open the Mark Waypoint Page.
3. Select the waypoint for which you want to
calculate the average location, and press
Enter
.
4. Press the
Menu
key to open the Options
Menu.
5. Highlight
Average Location
, and press
Enter
to open the Average Location Page. The unit
begins calculating the average location of the
waypoint.
Original
location
New location
Moving a waypoint
