Garmin eTrex - Hiking GPS Receiver, Руководство пользователя

Страница: 31 / 68

17
Trip Computer Page
Trip Computer Data Fields
•
Bearing
*—the compass direction from your location to your destination.
•
Course
*—the direction from your starting location to a destination.
•
Elevation
—the measurement of height above mean sea level.
•
Final Dest
*—(Final Destination) the last waypoint on your route.
• Final Dist *—(Final Distance) the distance from your location to your destination.
• Final ETA *—the estimated time you will arrive at your destination.
• Final ETE *—the estimated total time left until you reach your destination.
• Heading —the direction you are traveling.
• Lat/Lon —the current GPS position.
• Location —shows your current latitude and longitude.
• Max Speed —the maximum speed traveled since last reset.
• Moving Avg —(Moving Average) the average speed while the unit is moving.
• Next Dest *—(Next Destination) the next waypoint on your route.
• Next Dist *—(Next Distance) the distance between your current location and the next
waypoint.
• Next ETA *—the estimated time you will arrive at the next waypoint.
• Next ETE *—the estimated total time left until you reach the next waypoint.
• Odometer —a running tally of distance traveled, based upon the distance between
second-by-second position readings.
• Off Course *— the distance you are off a desired course in either direction, left or right.
• Over’l Spd —(Overall Speed) the averaged speed since your last reset, including
stopped and moving time.
• Speed —shows how fast you are going.
• Sunrise —the time at which the sun rises on this day at the current location.
• Sunset —the time at which the sun sets on this day at the current location.
•
Time of Day
—the current time for the selected time zone.
•
Time-Moving
—the time elapsed while the unit is moving since the last trip reset.
•
Time-Stop
—the time elapsed while the unit is not moving since the last trip reset.
•
Time-Total
—the total time you have traveled since the last trip reset.
•
To Course
*—the compass direction you must go to get back to the original course.
•
Trip Odometer
—the total distance you’ve gone since the last reset.
•
Turn
*—the angle difference (in degrees) from the bearing to your destination and your
current line of travel. ‘L’ means turn Left, ‘R’ means turn Right.
•
Vert Speed
—(Vertical Speed) the rate of altitude gain/loss over time.
• VMG *—(Velocity Made Good) the speed you are closing in on a
destination along a desired course. Also referred to as the ‘vector velocity’ to your
destination.
Fields marked with an asterisk (*) only display data while you are actively navigating.