Garmin ENDURO, Руководство владельца и краткое руководство по началу работы, Страница: 46 / 77

• Customize the power data fields ( Customizing the Data
Screens , page 32 ).
Using Electronic Shifters
Before you can use compatible electronic shifters, such as
Shimano
®
Di2
™
shifters, you must pair them with your device
( Pairing Your Wireless Sensors , page 39 ). You can customize
the optional data fields ( Customizing the Data Screens ,
page 32 ). The Enduro device displays current adjustment values
when the sensor is in adjustment mode.
Situational Awareness
Your Enduro device can be used with the Varia
™
smart bike
lights and rearview radar to improve situational awareness. See
the owner's manual for your Varia device for more information.
NOTE: You may need to update the Enduro software before
pairing Varia devices ( Updating the Software Using the Garmin
Connect App , page 11 ).
Foot Pod
Your device is compatible with the foot pod. You can use the
foot pod to record pace and distance instead of using GPS when
you are training indoors or when your GPS signal is weak. The
foot pod is on standby and ready to send data (like the heart
rate monitor).
After 30 minutes of inactivity, the foot pod powers off to
conserve the battery. When the battery is low, a message
appears on your device. Approximately five hours of battery life
remain.
Improving Foot Pod Calibration
Before you can calibrate your device, you must acquire GPS
signals and pair your device with the foot pod ( Pairing Your
Wireless Sensors , page 39 ).
The foot pod is self-calibrating, but you can improve the
accuracy of the speed and distance data with a few outdoor runs
using GPS.
1
Stand outside for 5 minutes with a clear view of the sky.
2
Start a running activity.
3
Run on a track without stopping for 10 minutes.
4
Stop your activity, and save it.
Based on the recorded data, the foot pod calibration value
changes, if necessary. You should not need to calibrate the
foot pod again unless your running style changes.
Calibrating Your Foot Pod Manually
Before you can calibrate your device, you must pair your device
with the foot pod sensor ( Pairing Your Wireless Sensors ,
page 39 ).
Manual calibration is recommended if you know your calibration
factor. If you have calibrated a foot pod with another Garmin
product, you may know your calibration factor.
1 Hold MENU .
2
Select Sensors & Accessories .
3
Select your foot pod.
4
Select Cal. Factor > Set Value .
5
Adjust the calibration factor:
• Increase the calibration factor if your distance is too low.
• Decrease the calibration factor if your distance is too high.
Setting Foot Pod Speed and Distance
Before you can customize the foot pod speed and distance, you
must pair your device with the foot pod sensor ( Pairing Your
Wireless Sensors , page 39 ).
You can set your device to calculate speed and distance using
your foot pod data instead of GPS data.
1
Hold MENU .
2
Select Sensors & Accessories .
3
Select your foot pod.
4
Select Speed or Distance .
5
Select an option:
• Select
Indoor when you are training with GPS turned off,
usually indoors.
• Select Always to use your foot pod data regardless of the
GPS setting.
tempe
™
The tempe is an ANT+ wireless temperature sensor. You can
attach the sensor to a secure strap or loop where it is exposed
to ambient air, and therefore, provides a consistent source of
accurate temperature data. You must pair the tempe with your
device to display temperature data from the tempe.
Club Sensors
Your device is compatible with Approach CT10 golf club
sensors. You can use paired club sensors to automatically track
your golf shots, including location, distance, and club type. See
the owner's manual for your club sensors for more information
( garmin.com/manuals/ApproachCT10 ).
Device Information
Specifications
Battery type Rechargeable, built-in lithium-ion battery
Battery life Up to 50 days in smartwatch mode
Water rating 10 ATM
1
Operating and storage
temperature range From -20º to 45ºC (from -4º to 113ºF)
USB charging temperature
range From 0º to 45ºC (from 32º to 113ºF)
Solar charging temperature
range From 0 to 60°C (from 32 to 140°F)
Wireless frequencies 2.4 GHz @ -1.5 dBm maximum
13.56 MHz @ -37.8 dBm maximum
Battery Information
The actual battery life depends on the features enabled on your
device, such as activity tracking, wrist-based heart rate,
smartphone notifications, GPS, internal sensors, and connected
sensors.
Mode Battery Life
Smartwatch mode with activity
tracking and 24/7 wrist-based
heart rate monitoring Up to 50 days/65 days with solar
2
GPS mode Up to 70 hr./80 hr with solar
3
Max. battery GPS mode Up to 200 hr./300 hr. with solar
3
Expedition GPS mode Up to 65 days/95 days with solar
2
Battery saver watch mode Up to 130 days/365 days with solar
2
Data Management
NOTE: The device is not compatible with Windows ® 95, 98, Me,
Windows NT ® , and Mac ® OS 10.3 and earlier.
1
The device withstands pressure equivalent to a depth of 100 m. For more
information, go to www.garmin.com/waterrating .
2
With use in 50,000 lux conditions
3
All-day wear with 3 hr./day outside in 50,000 lux conditions
40 Device Information