8 Press down slightly and close the lever to lock the Edge device into the mount.
9 Connect the power pod cable to the compatible power cable on your eBike (
).
Required Cables
In order to complete the installation, you must purchase one of these compatible cables:
• Bosch
®
power mount accessory cable
• Shimano
®
power mount accessory cable
NOTE: Garmin recommends having a bike technician trim the compatible Shimano cable to the correct
length.
Wire Color
Wire Function
Red
Power
Yellow
Power
Blue
Ground
Black
Ground
• USB-A power mount accessory cable
Edge Power Mount Status LED
LED Activity
Status
Solid green
The power mount is connected to power, but it is not paired with an Edge device.
Flashing green The power mount is paired with the Edge device and is charging.
Flashing red
An error occurred. Unplug the power mount, and remove the Edge device. Plug the power
mount in again, and install the Edge device. If the red flashing continues, contact Product
Support.
6
Installation Instructions