Garmin Edge 810, Руководство пользователя

Страница: 15 / 26

3
Select a file.
4
Select Edit > Copy .
5
Open the portable device, drive, or volume for the device or
memory card.
6 Browse to a folder.
7 Select Edit > Paste .
The file appears in the list of files in the device memory or on
the memory card.
Deleting Files
NOTICE
If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
1 Open the Garmin drive or volume.
2
If necessary, open a folder or volume.
3
Select a file.
4
Press the Delete key on your keyboard.
Disconnecting the USB Cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not necessary
to safely disconnect.
1
Complete an action:
• For Windows computers, select the
Safely Remove
Hardware icon in the system tray, and select your device.
• For Mac computers, drag the volume icon to the trash.
2 Disconnect the cable from your computer.
Navigation
This section describes navigation features and settings.
Navigation settings also apply to navigating courses ( Courses ,
page 4 ).
• Locations and finding places ( Locations , page 11 )
• Route settings ( Route Settings , page 12 )
• Optional maps ( Purchasing Additional Maps , page 12 )
• Map settings ( Map Settings , page 12 )
Locations
You can record and store locations in the device.
Saving Your Location
You can save your present location, such as your home or
parking spot.
From the home screen, select > System > GPS > Mark
Location > .
Saving Locations from the Map
1
From the home screen, select > .
2
Browse the map for the location.
3 Select the location on the map.
Location information appears at the top of the map.
4 Select the information bar at the top of the screen.
5 Select > to save the location.
Navigating to a Location
1
From the home screen, select > .
2
Select an option:
• Select
Locations to navigate to a saved location.
• Select Recent Finds to navigate to one of the last 50
locations you have found.
• Select Coordinates to navigate to known coordinates.
• Select All POIs (requires routable maps) to navigate to a
point of interest.
• Select Addresses (requires routable maps) to navigate to
a specific address.
• Select Intersections to navigate to the intersection of two
streets.
• Select Cities to navigate to a city.
• Select to narrow your search.
3
If necessary, select to enter specific search information
(optional for locations, POIs, and cities only).
4
Select a location.
5
Select RIDE .
6 Follow the on-screen instructions to your destination.
Navigating to Known Coordinates
1 From the home screen, select > > Coordinates .
2
Enter the coordinates, and select .
3
Follow the on-screen directions to your destination.
Navigating Back to Start
At any point during your ride, you can return to the starting point.
1
Go for a ride ( Going for a Ride , page 3 ).
2
During your ride, tap the screen to view the timer overlay.
3
Select > Back to Start > RIDE .
The device navigates you back to the starting point of your
ride.
Stopping Navigation
1
Tap the screen to view the timer overlay.
2
Select > Where To > Stop Navigation .
Projecting a Location
You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1
From the home screen, select > > Locations .
2
Select a location.
3
Select the information bar at the top of the screen.
4
Select > Project Waypoint .
5 Enter the bearing and distance to the projected location.
6 Select .
Editing Locations
1
From the home screen, select > > Locations .
2
Select a location.
3 Select the information bar at the top of the screen.
4 Select .
5
Select an attribute.
Navigation 11