Edge 605/705 Owner’s Manual
G
ettinG
S
tarted
2. Select a bike profile. You can
set up to three profiles.
3. Enter your bike information.
4. (Edge 705 only) If you have a
GSC 10 speed and cadence
sensor, select the
Cadence
check box. If you have a third-
party power meter, select the
Power
check box. For more
accessory information, see
.
5. In the
Wheel Size
field, select
Auto
to have the GSC 10
automatically detect your tire
size using GPS data, or select
Custom
to enter your wheel
size. For a table of sizes and
circumferences, see
.
Step 8: Go for a Ride!
1. Press
mode
to view the bike
computer page.
2. Press
start
to start the timer.
3. After completing your ride,
press
stop
.
4. Press and hold
lap/reset
to
save your ride data and reset
the timer.
Step 9: Download Free
Software
1. Go to
.
2. Follow the on-screen
instructions to download
Garmin Training Center or
Garmin Connect.