Edge
™
205/305 Owner’s Manual
83
A
PPENDIX
Replacing the Battery
The heart rate monitor and
GSC10 (shown) contain a user-
replaceable CR2032 battery.
NOTE:
Dispose of the used battery
properly.
To replace the battery:
1. Locate the circular battery
cover on the back of the heart
rate monitor or the side of the
GSC10.
2. Use a coin to twist the cover
counter-clockwise until it
is loose enough to remove
(arrow points to unlocked).
3. Remove the cover, and
replace the battery positive
side up. Be careful not to
damage or lose the o-ring
gasket on the cover.
4. Use a coin to twist the cover
back into place (arrow points
to locked).
battery
cover
locked
unlocked
arrow
GSC10 Battery Installation
battery cover
CR2032
battery