Edge
™
205/305 Owner’s Manual
13
G
ETTING
S
TARTED
Acquire Satellite
Signals
Before you begin using the Edge,
you must acquire GPS satellite
signals. It may take 30–60
seconds to acquire signals.
To acquire satellite signals:
Go outdoors to an open area.
Then press and hold the
Power
button to turn on the Edge.
On the Satellite page, the
available satellites are flashing
while the Edge searches for
satellite signals. Acquired
satellites and each corresponding
bar below change to solid. The
GPS accuracy appears at the top
of the page.
Wait while the Edge searches
for satellites. For best reception,
make sure the Edge is facing up.
Stand still in an open area, and
do not begin moving until the
Satellite page disappears. After
the Satellite page disappears,
you can begin your ride.
NOTE:
To turn off GPS receiver and
