Garmin EDGE 1030, Руководство пользователя

Страница: 22 / 32

• Tap a data field, and tap another data field to rearrange
them.
9
Select .
Rearranging Data Screens
1
Select > Activity Profiles .
2
Select a profile.
3
Select Data Screens > .
4
Select a data screen.
5
Select or .
6
Select .
Changing the Satellite Setting
For increased performance in challenging environments and
faster GPS position location, you can enable GPS+GLONASS.
Using the GPS+GLONASS setting reduces battery life more
quickly than using only GPS.
1
Select >
Activity Profiles
.
2
Select a profile.
3
Select GPS Mode .
4
Select an option.
Alerts
You can use alerts to train toward specific time, distance,
calorie, heart rate, cadence, and power goals. Alert settings are
saved with your activity profile.
Setting Range Alerts
If you have an optional heart rate monitor, cadence sensor, or
power meter, you can set up range alerts. A range alert notifies
you when the device measurement is above or below a
specified range of values. For example, you can set the device
to alert you when your cadence is below 40 RPM and over
90 RPM. You can also use a training zone ( Training Zones ,
page 8 ) for the range alert.
1
Select > Activity Profiles .
2
Select a profile.
3
Select Alerts .
4
Select
Heart Rate Alert
,
Cadence Alert
, or
Power Alert
.
5
If necessary, turn on the alert.
6
Select the minimum and maximum values, or select zones.
7
If necessary, select .
Each time you exceed or drop below the specified range, a
message appears. The device also beeps if audible tones are
turned on (
Turning the Device Tones On and Off
, page 19 ).
Setting a Recurring Alert
A recurring alert notifies you each time the device records a
specified value or interval. For example, you can set the device
to alert you every 30 minutes.
1
Select >
Activity Profiles
.
2
Select a profile.
3
Select Alerts .
4
Select an alert type.
5
Turn on the alert.
6
Enter a value.
7
Select .
Each time you reach the alert value, a message appears. The
device also beeps if audible tones are turned on ( Turning the
Device Tones On and Off , page 19 ).
Auto Lap
Marking Laps by Position
You can use the Auto Lap feature to mark the lap at a specific
position automatically. This feature is helpful for comparing your
performance over different parts of a ride (for example, a long
climb or training sprints). During courses, you can use the By
Position option to trigger laps at all of the lap positions saved in
the course.
1
Select > Activity Profiles .
2
Select a profile.
3
Select Auto Features > Auto Lap > Auto Lap Trigger > By
Position > Lap At .
4
Select an option:
• Select
Lap Press Only to trigger the lap counter each
time you select and each time you pass any of those
locations again.
• Select
Start and Lap
to trigger the lap counter at the GPS
location where you select and at any location during
the ride where you select .
• Select Mark and Lap to trigger the lap counter at a
specific GPS location marked before the ride and at any
location during the ride where you select .
5
If necessary, customize the lap data fields ( Adding a Data
Screen , page 17 ).
Marking Laps by Distance
You can use the Auto Lap feature to mark the lap at a specific
distance automatically. This feature is helpful for comparing your
performance over different parts of a ride (for example, every 10
miles or 40 kilometers).
1
Select > Activity Profiles .
2
Select a profile.
3
Select Auto Features > Auto Lap > Auto Lap Trigger > By
Distance > Lap At .
4
Enter a value.
5
If necessary, customize the lap data fields (
Adding a Data
Screen
, page 17 ).
Marking Laps by Time
You can use the Auto Lap feature to mark the lap at a specific
time automatically. This feature is helpful for comparing your
performance over different parts of a ride (for example, every 20
minutes).
1
Select > Activity Profiles .
2
Select a profile.
3
Select
Auto Features
>
Auto Lap
>
Auto Lap Trigger
>
By
Time
>
Lap At
.
4
Enter a value.
5
If necessary, customize the lap data fields ( Adding a Data
Screen , page 17 ).
Using Auto Sleep
You can use the Auto Sleep feature to automatically enter sleep
mode after 5 minutes of inactivity. During sleep mode, the
screen is turned off and the ANT+ sensors, Bluetooth, and GPS
are disconnected.
Wi
‑ Fi continues to run while the device is asleep.
1
Select > Activity Profiles .
2
Select a profile.
3
Select
Auto Features
>
Auto Sleep
.
Using Auto Pause
You can use the Auto Pause feature to pause the timer
automatically when you stop moving or when your speed drops
below a specified value. This feature is helpful if your ride
18 Customizing Your Device