Garmin DESCENT MK2I, Руководство пользователя

Страница: 15 / 162

Clearing User Data with the Kill Switch Feature
You can use the Kill Switch feature to quickly remove all saved user data and reset all settings on the device to
factory default values.
1 Customize a button or button combination for the Kill Switch feature (
Customizing the Hot Keys, page 124 ).
2 Hold the button or button combination you customized to activate the Kill Switch feature.
TIP: You can press any button to cancel the Kill Switch feature during a 10-second countdown.
After 10 seconds, the device deletes all user-entered data.
Pairing Your Smartphone
To use the connected features on your watch, you must pair it directly through the Garmin Dive
™
app, instead of
from the Bluetooth ® settings on your smartphone.
1 From the app store on your smartphone, install and open the Garmin Dive app.
2 Select an option to enable pairing mode on your watch:
• During the initial setup, select Yes when you are prompted to pair with your smartphone.
• If you previously skipped the pairing process, hold MENU, and select Pair Phone.
3 Select an option to add your watch to your account:
• If this is the first time you are pairing a device with the Garmin Dive app, follow the on-screen instructions.
• If you already paired another device with the Garmin Dive app, select Add > Devices, and follow the on-
screen instructions.
Charging the Device
WARNING
This device contains a lithium-ion battery. See the Important Safety and Product Information guide in the
product box for product warnings and other important information.
NOTICE
To prevent corrosion, thoroughly clean and dry the contacts and the surrounding area before charging or
connecting to a computer. Refer to the cleaning instructions (
Device Care, page 129 ).
1 Pinch the sides of the charging clip.
2 Align the clip with the contacts on the back of the device, and release the clip.
3 Plug the USB cable into a USB charging port.
Introduction 5