Garmin DA42-L360, Руководство по эксплуатации кабины

Страница: 49 / 102

Garmin G1000 Cockpit Reference Guide for the DA42-L360 190-01062-01 Rev. A
33
procedures
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal Oper
ation
Annun/
Alerts
Appendix
Index
1)
Press the
PROC
Key.
2)
Turn the large
FMS
Knob to highlight ‘SELECT APPROACH’.
3) Press the ENT Key. A list of available approaches for the destination airport
is displayed.
4) Turn either FMS Knob to highlight the desired approach.
5) Press the ENT Key. A list of available transitions for the selected approach
procedure is now displayed.
6) Turn either FMS Knob to select the desired transition. The “Vectors”
option assumes vectors will be received to the final course segment of
the approach and will provide navigation guidance relative to the final
approach course.
7)
Press the
ENT
Key. ‘LOAD? or ACTIVATE?’ is now displayed with ‘LOAD?’
highlighted.
8)
Turn the large
FMS
Knob to select either ‘LOAD?’ or ‘ACTIVATE?’.
Selecting ‘LOAD?’ enters the selected approach procedure into the active
flight plan, but is not currently active. Selecting ‘ACTIVATE?’ enters the
selected approach procedure into the active flight plan and is immediately
activated.
9)
Press the
ENT
Key.
ACtivAte An ApprOACh in the ACtive Flight plAn
1)
Press the
PROC
Key.
2)
Turn the large
FMS
Knob to highlight ‘ACTIVATE APPROACH’.
3)
Press the
ENT
Key.
ACtivAte A veCtOr tO FinAl ApprOACh Fix
1)
Press the
PROC
Key.
2)
Turn the large
FMS
Knob to highlight ‘ACTIVATE VECTOR-TO-FINAL’.
3) Press the ENT Key.
4) The final approach course becomes the active leg.