Garmin DA42-L360, Руководство по эксплуатации кабины

Страница: 42 / 102

Garmin G1000 Cockpit Reference Guide for the DA42-L360 190-01062-01 Rev. A
26
Flight planning
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal Oper
ation
Annun/
Alerts
Appendix
Index
Or:
a)
Turn the small
FMS
Knob to the left. Initially, a flight plan waypoint list
is displayed.
b)
Turn the small
FMS
Knob to the right to display the ‘RECENT’
waypoints.
c)
Turn the large
FMS
Knob to select the desired waypoint.
d) Press the ENT Key.
e) Press the ENT Key again to “accept” the waypoint.
enter An AirWAY in A Flight plAn
1) Press the FPL Key.
2) Press the FMS Knob to activate the cursor (not required on the PFD).
3)
Turn the large
FMS
Knob to highlight the waypoint after the desired airway
entry point. If this waypoint is not a valid airway entry point, a valid entry
point should be entered at this time.
4) Turn the small FMS Knob one click clockwise and press the LD AIRWY
Softkey, or press the MENU Key and select “Load Airway”. The Select
Airway Page is displayed. The
LD AIRWY
Softkey or the “Load Airway”
menu item is available only when an acceptable airway entry waypoint has
been chosen (the waypoint ahead of the cursor position).
5)
Turn the
FMS
Knob to select the desired airway from the list, and press the
ENT
Key. Low altitude airways are shown first in the list, followed by “all”
altitude airways, and then high altitude airways.
6)
Turn the
FMS
Knob to select the desired airway exit point from the list, and
press the ENT Key. ‘LOAD?’ is highlighted.
7)
Press the
ENT
Key. The system returns to editing the flight plan with the
new airway inserted.
invert An ACtive Flight plAn
1) Press the FPL Key to display the active flight plan.
2) Press the MENU Key to display the Page Menu.
3) Turn the large FMS Knob to highlight ‘Invert Flight Plan’.