3 During an activity, press UP or DOWN to view the VIRB
data screen.
4 If necessary, wait while your watch connects to your
camera.
5 Hold MENU.
6 Select VIRB.
7 Select an option:
• To control the camera using the activity timer, select
Settings > Recording Mode > Timer Start/Stop.
NOTE: Video recording automatically starts and
stops when you start and stop an activity.
• To control the camera using the menu options,
select Settings > Recording Mode > Manual.
• To manually record video, select Start Recording.
The video counter appears on the D2 Mach 1
screen.
• To take a photo while recording video, press DOWN.
• To manually stop recording video, press STOP.
• To take multiple photos in burst mode, select Take
Burst.
• To send the camera to sleep mode, select Sleep
Camera.
• To wake the camera from sleep mode, select Wake
Camera.
Xero Laser Location Settings
Before you can customize laser location settings, you
must pair a compatible Xero device (
).
Hold MENU, and select Sensors & Accessories > XERO
Laser Locations > Laser Locations.
During Activity: Enables the display of laser location
information from a compatible, paired Xero device
during an activity.
Share Mode: Allows you to share laser location
information publicly or broadcast it privately.
Map
Your watch can display several types of Garmin map
data, including topographical contours, nearby points of
interest, ski resort maps, and golf courses. You can
use the Map Manager to download additional maps or
manage map storage.
To purchase additional map data and view compatibility
information, go to
represents your location on the map. When you are
navigating to a destination, your route is marked with a
line on the map.
Viewing the Map
1 Select an option to open the map:
• Press START, and select Map to view the map
without starting an activity.
• Go outside, start a GPS activity (
), and press UP or DOWN to scroll to the map
screen.
2 If necessary, wait while the watch locates satellites.
3 Select an option to pan and zoom the map:
• To use the touchscreen, tap the map, tap and drag
to position the crosshairs, and press UP or DOWN to
zoom in or out.
• To use the buttons, hold MENU, select Pan/Zoom,
and press UP or DOWN to zoom in or out.
NOTE: You can press START to toggle between
panning up and down, panning left and right, or
zooming.
4 Hold START to select the point indicated by the
crosshairs.
Saving or Navigating to a Location on the Map
You can select any location on the map. You can save the
location or start navigating to it.
1 From the map, select an option:
• To use the touchscreen, tap the map, tap and drag
to position the crosshairs, and press UP or DOWN to
zoom in or out.
• To use the buttons, hold MENU, select Pan/Zoom,
and press UP or DOWN to zoom in or out.
NOTE: You can press START to toggle between
panning up and down, panning left and right, or
zooming.
2 Pan and zoom the map to center the location in the
crosshairs.
3 Hold START to select the point indicated by the
crosshairs.
4 If necessary, select a nearby point of interest.
5 Select an option:
• To download the weather radar image associated
with the selected location, select Show NEXRAD
(
Viewing NEXRAD Weather Radar, page 3
).
• To start navigating to the location, select Go.
• To save the location, select Save Location.
• To view information about the location, select
Review.
44
Map
Содержание D2 MACH1
Страница 1: ...D2 MACH1 Owner sManual ...
Страница 8: ......
Страница 85: ......
Страница 86: ...support garmin com June 2022 190 02855 00_0B ...
