6 Select an option:
• Select Add New to add a new alert for the activity.
• Select the alert name to edit an existing alert.
7 If necessary, select the type of alert.
8 Select a zone, enter the minimum and maximum
values, or enter a custom value for the alert.
9 If necessary, turn on the alert.
For event and recurring alerts, a message appears each
time you reach the alert value. For range alerts, a message
appears each time you exceed or drop below the specified
range (minimum and maximum values).
Activity Map Settings
You can customize the appearance of the map data
screen for each activity.
Hold MENU, select Activities & Apps, select an activity,
select the activity settings, and select Map.
Configure Maps: Shows or hides data from installed map
products.
Map Theme: Sets the map to display data optimized
for your activity type. The System option uses the
preferences from the system map settings (
).
Use Sys. Settings: Enables the watch to use the
preferences from the map system settings (
). When this setting is disabled, you
can customize the map settings for the activity.
Restore Theme: Allows you to restore default map theme
settings or themes that have been deleted from the
watch.
Routing Settings
You can change the routing settings to customize the way
the watch calculates routes for each activity.
NOTE: Not all settings are available for all activity types.
Hold MENU, select Activities & Apps, select an activity,
select the activity settings, and select Routing.
Activity: Sets an activity for routing. The watch calculates
routes optimized for the type of activity you are doing.
Popularity Routing: Calculates routes based on the most
popular runs and rides from Garmin Connect.
Courses: Sets how you navigate courses using the watch.
Use the Follow Course option to navigate a course
exactly as it appears, without recalculating. Use the Use
Map option to navigate a course using routable maps,
and recalculate the route if you stray from the course.
Calculation Method: Sets the calculation method to
minimize the time, distance, or ascent in routes.
Avoidances: Sets the road or transportation types to avoid
in routes.
Type: Sets the behavior of the pointer that appears during
direct routing.
Using ClimbPro
The ClimbPro feature helps you manage your effort for the
upcoming climbs on a course. You can view climb details,
including gradient, distance, and elevation gain, before
or in real time while following a course. Cycling climb
categories, based on length and gradient, are indicated by
color.
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
4 Select the activity settings.
5 Select ClimbPro > Status > When Navigating.
6 Select an option:
• Select Data Field to customize the data field that
appears on the ClimbPro screen.
• Select Alert to set alerts at the start of a climb or at
a certain distance from the climb.
• Select Descents to turn descents on or off for
running activities.
• Select Climb Detection to choose the types of
climbs detected during cycling activities.
7 Review the climbs and course details for the course
(
Viewing or Editing Course Details, page 56
).
8 Start following a saved course (
).
Enabling Auto Climb
You can use the auto climb feature to detect elevation
changes automatically. You can use it during activities
such as climbing, hiking, running, or biking.
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Climb > Status.
6 Select Always or When Not Navigating.
7 Select an option:
• Select Run Screen to identify which data screen
appears while running.
• Select Climb Screen to identify which data screen
appears while climbing.
• Select Invert Colors to reverse the display colors
when changing modes.
• Select Vertical Speed to set the rate of ascent over
time.
• Select Mode Switch to set how quickly the device
changes modes.
NOTE: The Current Screen option allows you to
automatically switch to the last screen you were
viewing before the auto climb transition occurred.
Satellite Settings
You can change the satellite settings to customize
the satellite systems used for each activity. For more
information about satellite systems, go to
Activities and Apps
19
Содержание D2 MACH1
Страница 1: ...D2 MACH1 Owner sManual ...
Страница 8: ......
Страница 85: ......
Страница 86: ...support garmin com June 2022 190 02855 00_0B ...
