background image

1.6 

Cable and Connection Considerations

19

Item

Wire Color

Wire Function

Red

Power

Black

Power supply - / Ground (power supply and NMEA 0183)

Blue

NMEA 0183 TXA

Brown

NMEA 0183 RXA

Gray

NMEA 0183 TXB

Violet

NMEA 0183 RXB

Orange

Accessory on

Yellow

Alarm low

1.6.2  Connecting the Wiring Harness to Power

 WARNING

When connecting the power cable, do not remove the in-line fuse holder. To prevent the 

possibility of injury or product damage caused by fire or overheating, the appropriate 

fuse must be in place as indicated in the product specifications. In addition, connecting 

the power cable without the appropriate fuse in place voids the product warranty.

Route the wiring harness to the power source and to the device.

Connect the red wire to the positive (+) battery terminal, and connect the black wire to 

the negative (-) battery terminal.

If necessary, install the locking ring and O-ring on the end of the wiring harness.

Insert the cable into the POWER connector on the back of the device, pushing firmly.

Turn the locking ring clockwise to attach the cable to the device.

Additional Grounding Consideration

This consideration is applicable only to devices that have a grounding screw.

Not all models have a grounding screw.

This device should not need additional chassis grounding in most installation situations. 

If you experience interference, the grounding screw on the housing can be used to 

connect the device to the water ground of the boat to help avoid the interference.

Содержание CS 1522











































































Отзывы: