Garmin CR 1522, Руководство пользователя

Страница: 56 / 74

CHAPTER 3 MENU AND SETTINGS 54
3.7.1 Selecting the Chart Orientation
The chart can be oriented in three different ways.
Select Orientation and select an orientation:
• Select Head Up to orient the chart so the heading always points straight up.
• Select North Up to orient the chart so north always points straight up.
• Select Course Up to orient the chart so the course (the direction your vessel is
moving) always points straight up.
3.7.2 Personalizing the Chart
You can customize the chart based on your preference.
• Select Detail to adjust the level of detail of the chart (from Least to Most ).
• Select Chart Size to adjust the size of the chart (from Smallest to Largest ).
• Select World Map to switch between Basic view and Full view.
• Select Inset Map to show/hide an inset map.
3.8 Navigation Info
Press [MENU] > Navigation Info to access navigation settings.
Menu
Settings
Preferences
Navigation Information
System
Alarms
Appearance
Other Vessels
Chart Setup
Navigation Info Waypoints
>
>
>
Tracks
Routes
Boundaries
Tides & Currents
Services
Communications
My Vessel
Navigate to Position
3.8.1 Navigating to Coordinates
You can navigate to a known position by entering its coordinates (in DDM format).
NOTE: Only available in Navigation Chart mode.
1 Select Navigate To Position and enter the coordinates.
2 Select Done or to begin navigating.
3 Press [MENU] > Navigation Options > Stop Navigation to stop navigating.
3.8.2 Managing Navigational Data
You can manage recorded waypoints, tracks, and routes. These can be stored in an
inserted SD card.
• Select Waypoints to open the waypoints list (see 2.5.4 ).
• Select Tracks to view and edit track options (see 3.8.3 ).
• Select Routes to view and manage routes (see 2.7.2 ).
• Select Boundaries to view and manage boundaries (see 3.5.3 ).