Colorado Series Owner’s Manual
G
ettinG
S
tarted
Adjusting the Backlight
You may want to adjust the backlight to better see the
screen.
To adjust the backlight level:
1. Press and quickly release the
Power
button.
2. Turn the Scroll
wheel on the
Rock ‘n’ Roller
clockwise or
counter-clockwise
to increase or
decrease the
brightness.
3. Press and quickly
release the
Power
key to close
the backlight
adjustment page.
Using and Installing an SD Card
The Colorado has an SD data card slot. You can
purchase an SD card for detailed map and data storage.
To install or remove an
SD card:
1. Remove the battery slip
cover from the back of
the Colorado.
2. Locate the card slot at
the bottom of the unit
and slide the card into
place until it clicks.
Check to be certain the
card is installed properly
in the slot.
3. Press down on the card
and release quickly to
eject it from the slot and
remove from the unit.
Backlight Adjustment
NOTE:
You can also check battery status and
GPS reception status on this page.
SD card
SD card
slot
Содержание Colorado Series
Страница 1: ...Colorado Series Owner s Manual all terrain GPS navigator ...
Страница 25: ......