Garmin Colorado Series, Быстрый старт

Страница: 4 / 64

Waypoints
To use the Shortcuts menu:
1. Select Shortcuts . The Shortcuts
menu appears.
2. Rotate the Rock ‘n Roller™ to the
preferred application and press
ENTER .
To mark a waypoint:
1. From the Map page, select
Shortcuts . Rotate the Rock ‘n
Roller and select Mark Waypoint .
The screen shows that the waypoint
was successfully saved. A three-digit
number is assigned to the new
waypoint (your current location).
2. Select Done to save the waypoint.
Select Edit to edit the waypoint
properties. Select
Cancel
to delete
the waypoint.
To go to a waypoint:
1. Select Shortcuts > Where To? >
Waypoints
.
2. Highlight the preferred waypoint
and press ENTER . A green circle
containing the word Go appears.
3. Press ENTER to begin navigating to
the waypoint, or press Options to
project or edit the waypoint.
4. To stop navigation, select Shortcuts
> Stop Navigation .
System Status
To adjust the backlight level:
1. Press and quickly release the Power key. The System
Status page on the Colorado appears.
2. Rotate the Rock ‘n Roller clockwise or counter-clockwise
to increase or decrease the backlight.
3. Select Back to close the System Status page and return to
the previous page.
System Status Page
Backlight
adjustment
Battery level
GPS signal
strength
Time, day, and date
NOTE:
The System Status page is also a quick way to check
the time, day, date, battery level, and GPS signal strength.
Waypoint Page
Waypoint Saved
Mark Waypoint
on Shortcuts