190-00820-11 Rev. A
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
140
AUDIO PANEL AND CNS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
a
ltitude
M
ode
The Altitude Mode is automatically selected when the aircraft becomes airborne. Altitude Mode may also
be selected manually by pressing the
ALT
Softkey while airborne. Altitude Mode generates Mode A and
Mode C replies. In ALT mode a green ALT indication and transponder code appear in the mode field of the
Transponder Data Box, and all transponder replies requesting altitude information are provided with pressure
altitude information.
Figure 4-43 Altitude Mode
ALT Mode
(Mode C Altitude
Reporting)
ENTERING A TRANSPONDER CODE
Entering a transponder code with softkeys:
1)
Press the
XPDR
Softkey to display the Transponder Mode Selection Softkeys.
2)
Press the
CODE
Softkey to display the Transponder Code Selection Softkeys, for digit entry.
3)
Press the digit softkeys to enter the code in the code field. When entering the code, the next softkey in sequence
must be pressed within 10 seconds, or the entry is cancelled and restored to the previous code. Pressing the
BKSP
Softkey moves the code selection cursor to the previous digit. Five seconds after the fourth digit has been
entered, the transponder code becomes active.
Entering
a Code
Figure 4-44 Entering a Code with Softkeys
Entering a transponder code with the PFD FMS Knob:
1)
Press the
XPDR
and the
CODE
Softkey as in the previous procedure to enable code entry.
2)
Turn the small
FMS
Knob to enter the first two code digits.
3)
Turn the large
FMS
Knob to move the cursor to the next code field.
4)
Enter the last two code digits with the small
FMS
Knob.
5)
Press the
ENT
Key to complete code digit entry.
Содержание CIRRUS PERSPECTIVE SR2x
Страница 2: ......
Страница 6: ...Pilot s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin 190 00820 11 Rev A Blank Page...
Страница 751: ......