Garmin Cessna Caravan G1000, Справочное руководство

Страница: 31 / 106

Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang 190-00600-02 Rev. A
15
gps navigation
Flight
Instruments
EICAS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal Oper
ation
Annun/
Alerts
Appendix
Index
gps nAvigAtion
direCt-to nAvigAtion
direct-to navigation using the mFd
1) Press the Direct-to
( )
Key on the MFD Control Unit.
2) Enter the waypoint identifier.
3)
Press the
ENT
Key to confirm the identifier. The ‘Activate?’ field is
highlighted.
4)
If no altitude constraint or course is desired, press the
ENT
Key to activate.
To enter an altitude constraint, proceed to step 5.
5)
Turn the large
FMS
Knob to place the cursor over the ‘VNV’ altitude field.
6)
Enter the desired altitude.
7)
Press the ENT Key. If the waypoint entered is an airport, the option to
select MSL or AGL is now displayed. If the waypoint is not an airport,
proceed to step 9.
8)
Turn the small
FMS
Knob to select ‘MSL’ or ‘AGL’.
9)
Press the ENT Key. The cursor is now flashing in the VNV offset distance
field.
10)
Enter the desired offset distance before (-) the waypoint.
11) Press the ENT Key. The ‘Activate?’ field is highlighted.
12) Press the ENT Key to activate.
direct-to navigation using the pFd
1) Press the Direct-to Key
( )
on the PFD or controller.
2)
Turn the large
FMS
Knob to place the cursor in the desired selection field.
3)
Turn the small
FMS
Knob to begin selecting the desired identifier, location,
etc.
4)
Press the
ENT
Key.
5)
The cursor is now flashing on ‘ACTIVATE?’. If no altitude constraint or
course is desired, press the
ENT
Key to activate. To enter an altitude
constraint, proceed to step 6.
6)
Turn the large
FMS
Knob to place the cursor over the ‘ALT’ altitude field.