manualshive.com logo in svg

Garmin Cessna Caravan G1000, Руководство пользователя, Страница: 630 / 724

Поделиться
Скачать
Garmin Cessna Caravan G1000 Скачать руководство пользователя страница 630

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

190-00709-05  Rev. D

616

ADDITIONAL FEATURES

8.8  ELECTRONIC CHECKLISTS

  NOTE:  

The optional checklists presented in this section are for example only and may differ from checklists 

available for the TBM850/900.  The information described in this section is not intended to replace the 
checklist information described in the AFM or the Pilot Safety and Warning Supplements document.

  NOTE:  

Garmin is not responsible for the content of checklists.  TBM850/900 checklists are created, modified, 

and updated by the aircraft manufacturer.

  NOTE:  

Checklists cannot be edited from within the system.

The optional Checklist functions are displayed on two levels of softkeys that are available from any MFD 

page.

Figure 8-82  Checklist Softkeys

CHKLIST 

DCLTR 

MAP 

The 

DONE 

Softkey label changes to 

UNDO 

when the checklist item is already checked. 

EXIT 

DONE 

EMERGCY 

SHW CHRT 

(Optional) 

SYSTEM

CPDLC

SYSTEM

The MFD is able to display optional electronic checklists which allow a pilot to quickly find the proper 

procedure on the ground and during each phase of flight.  The G1000 accesses the checklists from an SD 
card inserted into the bezel slot.  For information regarding SD card placement, refer to the System Overview 
Section.

Содержание Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов