Garmin Cessna Caravan G1000, Руководство пользователя

Страница: 433 / 724

190-00709-05 Rev. D
Garmin G1000 Pilot’s Guide for the Socata TBM 850/900
419
HAZARD AVOIDANCE
Sector Scan:
1) While in horizontal scan mode, select the
BRG
Softkey to display the Bearing Line and place the cursor in the
BEARING field. If the Bearing Line is not displayed, press the MENU Key and turn the large FMS Knob to select
Show Bearing Line.
2)
Press the ENT Key.
Figure 6-112 Selecting Sector Scan Position
3) Turn the small FMS Knob to place the Bearing Line in the desired position. The location of the Bearing Line
becomes the center point of the Sector Scan.
4)
Turn the large FMS Knob to place the cursor in the SECTOR SCAN field.
5) Turn the small FMS Knob to select FULL, 60˚, 40˚, or 20˚ scan.
6) If desired, readjust the Bearing Line as discussed previously to change the center of the Sector Scan.
7) Select the
BRG
Softkey again to remove the Bearing Line and cursor. The bearing reference is also reset to 0º.