Garmin Cessna Caravan G1000 Скачать руководство пользователя страница 359 | Manualshive

Страница: 359 / 724

Garmin Cessna Caravan G1000 Скачать руководство пользователя страница 359

190-00709-05 Rev. D

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

345

HAZARD AVOIDANCE

ECHO TOPS

NOTE:

Echo tops cannot be displayed at the same time as NEXRAD or Cloud Tops are selected for display.

The Echo Tops weather product (Figure 6-14) shows the location, elevation, and direction of the highest

radar echo. The highest radar echo does not indicate the actual top of a storm or clouds. It indicates the
highest altitude at a which NEXRAD radar was able to detect precipitation. Note this Echo Tops altitude
may be significantly higher than the highest altitude airborne weather radar was able to detect precipitation,
particularly at longer ranges from the airborne weather radar antenna. See section 6.3 for more information
on airborne weather radar. The Echo Tops weather product, like all data link weather products, does not
provide real-time information.

Figure 6-14 Echo Tops Weather Product

Displaying Echo Tops information:

1)

Select the Weather Data Link (XM) Page with the

FMS

Knob.

2)

Select the

ECHO TOP

Softkey.

To display the Echo Tops legend, select the

LEGEND

Softkey when Echo Tops is selected for display. Since

Echo Tops and Cloud Tops use the same color scaling to represent altitude, display of these weather products
is mutually exclusive. When Echo Tops is activated, NEXRAD and Cloud Tops data are removed.

«
...
357
358
359
360
361
...
»

Содержание Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов