Garmin Cessna Caravan G1000, Руководство по техническому обслуживанию системы

Страница: 210 / 302

Page 6-2 G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
Revision 1 190-00716-01
6.1 GDU 1040A and GDU 1500
Removal:
1. Using a 3/32” hex tool, rotate all four ¼-turn fasteners counter-clockwise until they reach their
stops.
2. Carefully remove the display from the panel.
3. While supporting the display, disconnect the connector.
Reinstallation:
1. Visually inspect the connector and pins for signs of damage. Repair any damage. While
supporting the display, connect the connector to the rear of the unit.
2. Carefully insert the display into the panel cutout, ensuring that all 4 ¼-turn fasteners align with
the corresponding holes.
3. Seat the display in the panel cutout. Do not use excessive force while inserting the display.
4. Once seated, rotate all four ¼-turn fasteners clockwise to lock the display to the panel.
5. Configure and test the MFD and/or PFD according to Section 7.1.
6.2 GMA 1347D Audio Panel
Removal:
1. Using a 3/32” hex tool, turn the hex nut counter-clockwise until the GMA 1347D is unlocked
from its location.
2. Carefully remove the GMA 1347D from its rack.
Reinstallation:
1. Visually inspect the connectors to ensure there are no bent or damaged pins. Repair any damage.
2. Gently insert the GMA 1347D into the rack until the locking tab engages the rack.
3. Begin to turn the hex nut clockwise. This draws the unit into the rack until seated. Do not over-
tighten the nut.
4. Configure and test the GMA 1347D according to Section 7.2.