background image

Garmin Boat Switch LED Codes

The color and blink sequence of the status LEDs on the Garmin Boat Switch device indicate its operational 
status and the status of in-use and overridden switches.

LED Label LED Color LED State

Status

Green

Slow blinking The Garmin Boat Switch device is connected to power.

COM

Green

Rapid blinking

The Garmin Boat Switch device is connected to the NMEA 2000 
network. The blink interval changes based on the amount of data being 
transferred.

COM

Red

Solid

The Garmin Boat Switch is not connected to the NMEA 2000 network. 
Indicates a connection or communication failure with the NMEA 2000 
network.

1-31

Green

Solid

The designated channel switch is active.

1-31

Green

Slow blinking The designated channel switch is selected.

1-31

Green

Rapid blinking The designated channel switch is manually activated.

1-31

Red

Rapid blinking The designated channel switch is manually deactivated.

1-31

Red

Solid

The designated channel switch has tripped a software fuse.

Display Codes

The characters shown on the screen of the Garmin Boat Switch device indicate its operational status.

Display Code

Status

SEL

The Garmin Boat Switch device is in manual selection mode.

CUA

The Garmin Boat Switch device is operating normally.

C01-C29

The designated channel switch is selected.

ON

The designated channel switch is manually activated.

OFF

The designated channel switch is manually deactivated.

ddd

The Garmin Boat Switch device is exiting manual selection mode.

© 2021–2022 Garmin Ltd. or its subsidiaries
Garmin

®

, Garmin Boat Switch

, and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may 

not be used without the express permission of Garmin.
Molex

®

 is a registered trademark of Molex, LLC in the United States of America and may be registered in other countries. NMEA 2000

®

 and the NMEA 2000 logo are 

registered trademarks of the National Marine Electronics Association. Wi

Fi

®

 is a registered mark of Wi-Fi Alliance Corporation. Windows

®

 is a registered trademark of 

Microsoft Corporation in the United States and other countries.

25

Содержание Boat Switch



























Отзывы: