Navigation Lights Option C
You can configure the device so that channels 1, 2, and 3 are interlocked and intended for one connection to
red/green/white navigation lights, one connection to a steaming light, and one connection to an anchor light.
When the device is connected properly using this option, it functions as described below.
• When underway under sail, pressing the switch for channel 1 turns on and off channel 1 (red/green/white
navigation lights), and turns off channel 2 (steaming light) and channel three (anchor light) if either are
already on.
• When underway under engine, pressing the switch for channel 2 turns on and off channel 1 (red/green/white
navigation lights), and channel 2 (steaming light), and turns off channel 3 (anchor light) if it is already on.
• When at anchor, pressing the switch for channel 3 turns on and off only channel 3 (anchor light), and turns off
channel 1 (red/green/white navigation lights) and channel 2 (steaming light) if either are already on.
Red, green, and white navigation lights
Steaming light
White anchor light
CH 1-TOGGLE 1(5A) wire
CH 2-TOGGLE 2(5A) wire
CH 3-TOGGLE 3(5A) wire
X1 wiring harness
Power ground
15
