background image

81

AQUAMAP™ 10x2/12x2 SERIES

Autopilot

WARNING

You can use the autopilot feature only at a station installed next to a helm, 

throttle, and helm control device.
You are responsible for the safe and prudent operation of your vessel. The 

autopilot is a tool that enhances your capability to operate your boat. It does 

not relieve you of the responsibility of safely operating your boat. Avoid 

navigational hazards and never leave the helm unattended.
Always be prepared to promptly regain manual control of your boat.
Learn to operate the autopilot on calm and hazard-free open water.
Use caution when operating the autopilot near hazards in the water, such as 

docks, pilings, and other boats.
The autopilot system continuously adjusts the steering of your boat to 

maintain a constant heading (heading hold). The system also allows manual 

steering and several modes of automatic-steering functions and patterns.
When the AQUAMAP is connected to a compatible Garmin autopilot system, 

you can engage and control the autopilot from the AQUAMAP.
For information about compatible Garmin autopilot systems, go to

Garmin.com

.

Opening the Autopilot Screen

Before you can open the autopilot screen, you must have a compatible 

Garmin autopilot installed and configured.

 

Select 

A/V, Gauges, Controls 

Autopilot

.

Engaging the Autopilot

When you engage the autopilot, the autopilot takes control of the helm and 

steers the boat to maintain your heading.

1

  From the autopilot screen, select 

MENU

.

2

  Select an option:

•   To steer the boat in a circular pattern, select 

Engage Circle

Your intended heading, direction, and circle time shows in the center of 

the autopilot screen.

•  To maintain a heading, select 

Engage Heading Hold

Your intended heading shows in the center of the autopilot screen.

Adjusting the Heading with the AQUAMAP in Step Steering Mode

•  Select 

<1° 

or 

1°> 

to initiate a single 1° turn.

•  Select 

<<10° 

or 

10°>> 

to initiate a single 10° turn.

•  Hold 

<1° 

or 

1°> 

to initiate a rate-controlled turn. 

The boat continues to turn until you let go of the key.

•  Hold 

<<10° 

or 

10°>> 

to initiate a sequence of 10° turns.

Содержание AQUAMAP 10x2 Series

















































































































Отзывы: