Garmin Apollo CNX80 Скачать руководство пользователя страница 49

Страница: 49 / 162

Basic Operation

Using the NRST Function to Change Your Destination to a Nearest Airport

1. Press

NRST

2. Turn the

Large

knob to select the desired nearest airport.

3. Press the

INFO

key. Note, if “IFR” is listed with the identifier, instrument approaches are available. Press

INFO

again to toggle back to the Nearest Waypoint list.

4. With the desired airport selected, press the

D->

key.

5. Press the

Dest

key. Press

Menu/Enter

to activate the new flight plan direct to the selected waypoint.

Pressing the Dest key will erase the active flight plan and build a one-leg flight plan direct from your

present position to the new destination airport. This makes the arrivals and approaches available for the

new destination airport.

6. Press

PROC

7. Press

Appch

for the destination waypoint. Select the approach with the

Large

and

Small

knobs.

You can also select the type of approach with the selection keys on the right side of the display. Press

Menu/Enter

8. Press

EXEC

. The GNS 480 will ask if you want to replace the Active flight plan with the Modified flight

plan. Press

Menu/Enter

to accept the change.

Search for All Nearest Airports/Helipads

Some airports/helipads, such as water landings or Point in Space (PINS) approaches, will only be

displayed when the following settings are used.

1. Press the

More

key and then

Limits

2. Select Runway Type: Hard/Soft/Water.
3. Select Runway Length: All Length.
4. Select Night Lighting: Not required.
5. Press Enter.

Flying Direct To a New Airport

Nearest Waypoint

Содержание Apollo CNX80



































































































































































Результаты поиска

Содержание Apollo CNX80

Отзывы:

Похожие инструкции для Apollo CNX80

Бренды по названию

Популярные бренды

Garmin Apollo CNX80, Руководство пилота

Результаты поиска

Содержание Apollo CNX80

Отзывы:

Похожие инструкции для Apollo CNX80

Бренды по названию

Популярные бренды