Garmin Alpha 100 with TT 15 mini, Руководство пользователя

Страница: 13 / 26

Repositioning a Waypoint to Your Current Location
You can change the position of a waypoint. For example, if you
move your vehicle, you can change the location to your current
position.
1
Select > Waypoint Manager .
2
Select a waypoint.
3 Select > Reposition Here .
The waypoint location changes to your current location.
Moving a Waypoint on the Map
1 Select > Waypoint Manager .
2
Select a waypoint.
3
Select > Move Waypoint .
4
Select the new location on the map.
5
Select Move .
Increasing the Accuracy of a Waypoint Location
You can refine a waypoint location for more accuracy. When
averaging, the device takes several readings at the same
location and uses the average value to provide more accuracy.
1
Select > Waypoint Manager .
2
Select a waypoint.
3 Select > Average Location .
4 Move to the waypoint location.
5
Select Start .
6
Follow the on-screen instructions.
7
When the confidence status bar reaches 100%, select Save .
For best results, collect 4 to 8 samples for the waypoint, waiting
at least 90 minutes between samples.
Projecting a Waypoint
You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1 Select > Waypoint Manager .
2
Select a waypoint.
3
Select > Project Waypoint .
4
Enter the bearing, and select .
5
Select a unit of measure.
6
Enter the distance, and select .
7
Select Save .
Deleting a Waypoint
1
Select > Waypoint Manager .
2
Select a waypoint.
3
Select > Delete > Yes .
Routes
A route is a sequence of waypoints or locations that leads you to
your final destination.
Creating a Route
1
Select > Route Planner > Create Route > Select First
Point .
2
Select a category.
3 Select the first point on the route.
4 Select Use > Select Next Point .
5
Select a point.
6
Repeat steps 3 through 6 to add all the points in the route.
Editing the Name of a Route
1 Select > Route Planner .
2 Select a route.
3
Select Change Name .
4
Enter the new name, and select .
Navigating a Saved Route
1 Select > Route Planner .
2 Select a route.
3
Select View Map > Go .
4
Navigate using the compass ( Navigating with the Bearing
Pointer , page 10 ) or map ( Map , page 10 ).
Editing a Route
1
Select > Route Planner .
2
Select a route.
3
Select Edit Route .
4
Select a point.
5
Select an option:
• To view the point on the map, select
Review .
• To change the order of the points on the route, select
Move Up or Move Down .
• To insert an additional point on the route, select Insert .
The additional point is inserted before the point you are
editing.
• To remove the point from the route, select Remove .
Reversing a Route
1
Select > Route Planner .
2
Select a route.
3
Select Reverse Route .
Viewing a Route on the Map
1
Select > Route Planner .
2
Select a route.
3
Select View Map .
Viewing the Active Route
1 Select > Active Route .
2
Select a point in the route to view additional details.
Deleting a Route
1
Select > Route Planner .
2 Select a route.
3 Select Delete Route > Yes .
Tracks
A track is a recording of your path. The track log contains
information about points along the recorded path, including time,
location, and elevation for each point.
Recording Track Logs
1
Select > Setup > Tracks > Track Log .
2
Select Record, Do Not Show or Record, Show On Map .
If you select Record, Show On Map, a line on the map
indicates your track.
3
Select Record Method .
4 Select an option:
• To record tracks at a variable rate that create an optimum
representation of your tracks, select Auto .
• To record tracks at a specified distance, select Distance .
• To record tracks at a specified time, select Time .
5 Select Interval .
6 Complete an action:
• If you selected
Auto for the Record Method , select an
option to record tracks more or less often.
Waypoints, Routes, and Tracks 9