Garmin AERA 660, Руководство пилота

Страница: 178 / 204

Garmin aera 660 Pilot’s Guide 190-02017-20 Rev. A
Appendix G
162
Overview
Navigation
Flight Planning
Hazar
d A
voidance
Additional F
eatur
es
Appendices
Index
Entering an aircraft profile:
1) From the Main Menu , touch Tools > Profile
2)
Touch the
Aircraft Identifier
button and enter the aircraft identifier using
the keypad. Touch Enter .
3)
Touch the
Map Symbol
button and touch the desired symbol from the list.
4)
Touch the
Aircraft Fuel Type
button and touch the desired fuel type from
the list.
5)
Touch the
Flight Planning Fuel Flow
button and enter the fuel flow
using the keypad. Touch
Enter
.
6)
Touch the
Flight Planning Cruise Speed
button and enter the cruise
speed using the keypad. Touch
Enter
.
7)
Touch the
Maximum Aircraft Speed
button and enter the max speed
using the keypad. Touch
Enter
.
WEIGHT & BALANCE
Weight & Balance may be used during pre-flight preparations to verify the weight
and balance conditions of the aircraft. By entering the weight and arm values, the aera
can calculate the total weight, moment, and center of gravity (CG).
Before entering the various figures, the empty weight of the airplane and the arm (or
“station”) for each weight should be determined. These figures should be determined
using the pilot’s operating handbook for the airplane, which also notes the weight
limitations and fore/aft CG limits. Compare those figures to the values calculated by
the aera.
To perform weight and balance calculations:
1) From the Main Menu , touch Tools > Weight & Balance
2)
Touch the fields to enter the desired weights and arms (or “stations”). The
calculated moment, weight, and CG figures appear at the bottom of the
screen. Keep in mind that the “Aircraft” (empty weight/arm) figures must
be entered as a reference to calculate a valid moment, weight, and CG.
3)
To empty the aircraft, touch
Menu
>
Empty Aircraft
.
NOTE:
This information is only for flight planning purposes. Consult the
aircraft’s pilot operating handbook for the official weight and balance data.