Garmin AERA 660, Руководство пилота

Страница: 158 / 204

Garmin aera 660 Pilot’s Guide 190-02017-20 Rev. A
Appendix D
142
Overview
Navigation
Flight Planning
Hazar
d A
voidance
Additional F
eatur
es
Appendices
Index
4)
Touch '
GTX TIS-A In'
or '
GTX TIS-A In/NMEA & VHF Out'
.
The TIS-A Status field indicates one of the following messages:
• Waiting For Data—searching for a valid TIS-A data stream.
• Data Available—receiving TIS-A data from the transponder.
• Data Unavailable—connection to transponder established, but TIS-A service is
unavailable.
• Lost Connection—an error occurred or the connection to the transponder was
lost.
aera Aviation Bare Wire Connections
CONNECTING TO A GDL 39/GDL 39R
To receive weather and traffic information from the GDL 39/GDL 39R, the GDL 39/
GDL 39R must be connected to the aera using the ‘GDL 39/GDL 39R Power/Data Cable
to Aera 660 Series (P/N 010-12373-02) or through a GDL 39/GDL 39R bare wire cable
(P/N 010-11686-40) installation. The aera must also be configured correctly to receive
traffic and weather information from the GDL 39/GDL 39R as described below.
Configuring aera for GDL 39/GDL 39R:
1) Connect the aera to the GDL 39/GDL 39R through the Power/Data Cable
or bare wire cable. The GDL 39/39R may be connected to either serial (RS-
232) port on the aera 660.
2)
From the
Main Menu
, touch
Tools
>
Setup
>
Interface
.