26
c320 Owner’s Manual
A
PPENDIX
Using the c320 Responsibly
Your unit is equipped with a “Safe Mode” feature to improve
driver safety. Safe Mode disables certain functions that may
become a distraction to use while driving. By default, this feature
is enabled, but it can be turned off to allow a passenger to operate
the unit. See page
Using the c320 in Practice Mode
You can set your c320 to indoor use, which stops satellite
reception. Use this operation mode when you are practicing basic
functions and features with the unit. To turn off satellite reception,
set the unit to
GPS Off
. See page
Avoiding Theft
To avoid theft, take your c320 with you or remove it from view
when you leave your vehicle.
If Your c320 Stops Responding
If your unit freezes or locks up, press the
Power
button to turn off
the unit, then press again to turn it back on. If this does not help,
reset your c320.
To reset the c320:
1. Remove the face plate. Place your thumb nail in the groove
located on the face plate (located under the Garmin logo) and
gently pull off the face plate.
2. Press the
Reset
button.
The unit will
operate normally
when you turn it
on again.
Reset
button
Power
button
Face plate
