QUICK START GUIDE
EdgeSafe Bypass | P1GxxBP
P1GxxBP Quick Start Guide
Garland’s EdgeSafe Bypass TAPs, are purpose-built to provide the ultimate failsafe device that eliminates
single points of failure, reduces network downtime, cuts deployment time and saves money, without
compromising the network.
External Bypass TAPs are connected between a network segment (router and switch or firewall) and an
active inline tool, like a firewall or intrusion prevention systems (IPS). Allowing you to monitor the tool’s
health and effectively manage the device through deployment, updates or troubleshooting. If your tool
goes offline for any reason the Bypass TAP functionality will automatically ‘bypass’ the tool, keeping your
network up while you resolve the issue.
This document describes the front panel, LED indications, interfaces, rear panel, rear switch and
installation procedure for the P1GxxBP.
Front Panel
LED Indications
Port A LFP
Green indicates LFP on Off indicates LFP off
Port A LNK
Link/Activity LED
Port B LFP
Green indicates LFP on Off indicates LFP off
Port B LNK
Link/Activity LED
Port C BP
Indicates when the Bypass is active
Port C LNK
Link/Activity LED
Port D BP
Indicates when the Bypass is active
Port D LNK
Link/Activity LED
BP
(ByPass): Green indicates the Tap is in Bypass
Off indicates the Tap is Inline
Note:
This LED is only active when the Tap is set to Bypass Mode (Switch 4 and 5 are down)
LNK
or
L
(Link/Activity): Solid when link is achieved and flashes when Ethernet activity is detected on a
particular interface
Rear Panel
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.
1
