Garland P10GSFPBPFE Скачать руководство пользователя страница 23

Страница: 23 / 69

User Guide

XtraTAP™ Portable Packet Broker | P10GSFPBPFE | 4.22.1

Syslog

The system supports an IPv4 or IPv6 address for Syslog. If IPv4 is desired, then an IPv4

management interface must be assigned. If IPv6 is desired, then an IPv6 management interface
must be assigned. The system allows for an IPv4 and IPv6 management interface to be assigned
simultaneously.

1. Select Syslog.

The Syslog Configuration panel will be displayed.

2. Select Edit Settings.

3. Select Enable Syslog Config.

4. Enable Unit ID, (optional).

5. Enter the Unit ID, (optional).

6. Enter the IPv4 or IPv6 Address.

7. Enter the desired UDP Port Number or use the default, 514.

8. Select Save.

9. Select Cancel to return the Syslog Configuration panel.

Syslog Test

1. Select Syslog Test.

The GUI message will be displayed,”Syslog Test Successful!”.

2. Verify the Syslog Test Message on the Syslog server.

SNMP

The system supports an IPv4 or IPv6 address for SNMP. If IPv4 is desired, then an IPv4

The following SNMP configuration options are supported:

V2 Read/Write
V2 Read Only
V3 Auth Type

MD5 / SHA

V3 Priv ProtocolDES / AES

1. Select SNMP.

The SNMP Configuration panel will be displayed.

2. Select Edit Configuration.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

Содержание P10GSFPBPFE






































































Результаты поиска

Содержание P10GSFPBPFE

Отзывы:

Бренды по названию

Популярные бренды

Garland P10GSFPBPFE, Руководство пользователя

Результаты поиска

Содержание P10GSFPBPFE

Отзывы:

Бренды по названию

Популярные бренды