Garland P10GSFPBPFE Скачать руководство пользователя страница 15

Страница: 15 / 69

User Guide

XtraTAP™ Portable Packet Broker | P10GSFPBPFE | 4.22.1

System Info

The System Information panel displays the following.

Chassis Name

Chassis Model

Chassis Serial Number

MAC Address

Software Version

1. Select System Info.

The System Information panel will be displayed.

General

The following configuration options may be displayed or modified.

Chassis Name
Key Press Timeout

1. Select General.

The General System Settings panel will be displayed.

2. Select Edit Configuration.

3. Enter the desired Chassis Name.

4. Enter the desired Key Press Timeout.

5. Select Save to save updates.

6. Select Cancel to return to the General System Settings panel.

Admin

The following configuration options may be displayed, modified, enabled or disabled.

Users
Groups
Authentication

Local
TACACS Primary
TACACS Secondary

1. Select Admin.

The Admin Settings panel will displayed.

Users

The default user is “admin”. Changes to the default user “admin” are allowed. However, the “admin”

user may not be deleted. Users displayed on the Admin Settings panel are for local authentication
only, not used for TACACS.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

Содержание P10GSFPBPFE






































































Результаты поиска

Содержание P10GSFPBPFE

Отзывы:

Бренды по названию

Популярные бренды

Garland P10GSFPBPFE, Руководство пользователя

Результаты поиска

Содержание P10GSFPBPFE

Отзывы:

Бренды по названию

Популярные бренды