User Guide
XtraTAP | P10GxxFE-X | 4.22.1
2. The Select All option may be selected to delete all config maps.
3. Select Delete Selected.
Config Map Priority
The config map priority needs to be considered when the same ingress port(s) is used in multiple config
maps to send traffic to multiple egress ports. In this case, the config map with the highest priority will be
considered first. In the following example there are three config maps with ingress port 1. The Traffic_A
config map is the highest priority 1, the Traffic_B config map is the next priority 2 and finally the Traffic_C
is the next priority 3. The priority of a config map may be changed to a higher or lower value using two
methods.
Figure 9 Config Map System Considerations
Method 1
1. Select the up or down arrow for the config map.
2. Select Save to save updates.
Method 2
1. Select Set.
The Set Priority panel will be displayed.
2. Enter the priority in the Set New Priority panel.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2023 Garland Technology, LLC. All rights reserved.
33