Garland P10GMSBPE Скачать руководство пользователя

Страница: 57 / 70

User Guide

EdgeSafe Bypass TAP | P10GxxBPE | 4.22.1

Bypass Tap Name

1. Select the Pencil icon for the desired tap.

The Tap Name panel will be displayed.

2. Enter the name.

3. Remove the name by placing the cursor in the name panel, backspace or delete the current name.

4. Select the Check to save updates.

5. Select Cancel to return the Bypass Taps panel.

Heartbeat Settings

The following configuration options may be displayed or modified.

No. Of Lost HB Packets
Heartbeats per Second

1. Select Settings on the Bypass Taps panel.

The Configure Heartbeat Settings panel will be displayed with the current configuration.

2. Enter the No. Of Lost HB Packets. Default is 10.

This is the number of heartbeats that must be lost on the inline appliance ports before any

tap will switch to bypass.

3. Enter the Heartbeats per Second. Default is 10.

This is the number of heartbeats per second applied to the inline appliance ports for all taps.

4. Select Save to save updates.

5. Select Cancel to return the Bypass Taps panel.

Taps Settings

The following configuration options may be displayed, modified, enabled or disabled.

Tap Modes
Fail Mode
LFP
Reverse Bypass

1. Edit the Tap Settings, by placing the cursor on the tap and double-press the left mouse button.

The Tap panel will be displayed.

2. Select Edit Tap Settings.

The Configure Inline Appliance panel will be displayed.

3. Select the Tap Mode.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

Содержание P10GMSBPE







































































Результаты поиска

Содержание P10GMSBPE

Отзывы:

Похожие инструкции для P10GMSBPE

Бренды по названию

Популярные бренды

Garland P10GMSBPE, Руководство пользователя

Результаты поиска

Содержание P10GMSBPE

Отзывы:

Похожие инструкции для P10GMSBPE

Бренды по названию

Популярные бренды