User Guide
EdgeSafe Bypass TAP | P10GxxBPE | 4.22.1
10. Bypass Filter Mode
In this mode, the network ports 1 and 2 and inline appliance ports 3 and 4 are defined by the system,
however there are no default config maps created between network port 1 and inline appliance port 3
or between network port 2 and inline appliance port 4. The traffic that is passed to the inline appliance
ports is determined by the config map(s) and filter(s) created. Config maps may be created from network
port 1 to inline appliance port 3 as well as, network port 2 to inline appliance port 4.
Figure 27 Bypass Filter Mode
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
55
