Garland P10GMSBPE Скачать руководство пользователя | Manualshive

Страница: 17 / 70

background image

User Guide

EdgeSafe Bypass TAP | P10GxxBPE | 4.22.1

The Create New Group panel will be displayed.

2. Enter the Group Name.

3. Select the desired privileges.

4. Select Save to save updates.

The new group will be displayed on the Admin Settings panel.

5. Select Cancel to return to the Admin Settings panel.

6. Modify the group privileges by selecting the pencil.

7. Deleted the group by selecting the Red X.

If a group has at least one user assigned it cannot be deleted.

Authentication

Two authentication options are supported, local or TACACS. TACACS authentication supports two

options, primary and secondary. The TACACS primary and secondary options may be enabled or
disabled independently. Local or TACACS authentication may be enabled or disabled independently,
however, at least one option must be enabled. The TACACS primary or secondary function supports
IPv4 only, IPv6 is not supported.

1. Select Authentication Settings.

The Authentication Settings panel will be displayed. Local authentication is enabled by default.

Local Authentication Disable

1. Deselect Local Authentication.

Local authentication may only be disabled provided that TACACS authentication, primary

or secondary has previously been enabled.

2. Select Save.

Local Authentication Enable

1. Select Local Authentication.

2. Select Save.

TACACS Primary Authentication

1. Select Enable Primary.

The TACACS Primary panel will be displayed.

2. Enter the IP Address, IPv4 or IPv6.

3. Enter the Secret Word, (optional).

4. Select Save to save updates.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

17

«
...
15
16
17
18
19
...
»

Содержание P10GMSBPE







































































Отзывы:

Нет отзывов

Похожие инструкции для P10GMSBPE

Бренд: 4RF Страницы: 7

Бренд: Palm Страницы: 4

Бренд: PaloAlto Networks Страницы: 3

DHI-NVR2104-P-4KS2

Бренд: Dahua Страницы: 23

Бренд: NA Страницы: 22

Бренд: JETWAY Страницы: 55

Бренд: Tbus Страницы: 25

Бренд: Faderfox Страницы: 10

NetIron MLXe Series

Бренд: Brocade Communications Systems Страницы: 305

Бренд: Netis Страницы: 16

Wisenet XRN-6410RB2-24TB

Бренд: Hanwha Techwin Страницы: 124

Бренд: Comelit Страницы: 140

TigerSwitch 100 SMC6924VF

Бренд: SMC Networks Страницы: 174

Бренд: Matrix Switch Corporation Страницы: 48

STEVAL-SCR002V1

Бренд: ST Страницы: 28

Бренд: Freescale Semiconductor Страницы: 42

OmniTik UPA-5HnD

Бренд: RouterBOARD Страницы: 4

Бренд: IBM Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды