Garland INT40G2SR44 Скачать руководство пользователя | Manualshive

Страница: 42 / 43

background image

User Guide

EdgeLens | INT40G2XX44 | 4.22.1

Mode

1. Modify the port mode by selecting the pull down panel for the desired port.

2. Select the desired mode. The available port modes are Normal, Loopback, Listen Only

and Force Link.

3. Select Save to save updates.

Port Statistics

The following statistics may be displayed on the Port Statistics panel.

Port number

Receive Errors

Transmit Errors

Receive Packets

Transmit Packets

Receive Discards

Transmit Discards

1. Select Port Statistics on the Port Configuration panel.

The Port Statistics panel will be displayed.

2. Update the statistics by selecting Refresh.

3. Clear and refresh the statistics by selecting Clear.

VLAN Tag

VLAN tag applies a VLAN ID to the packets when the port is configured as an ingress port on
a config map. This option is only available for packet brokers ports. The packet broker section
consists of ports 5 through 36.

1. Select the VLAN Tag enable option for the desired port.

2. Enter the desired VLAN ID, (1-4094).

3. Select Save.

4. Disable by deselecting the VLAN Tag option for the desired port.

5. Select Save.

VLAN Strip

VLAN strip removes the outer VLAN ID for packets when the port is configured as an egress
port on a config map. This option is only available for packet brokers ports. The packet broker section
consists of ports 5 through 36.

1. Select the VLAN Strip option for the desired port.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

42

«
...
40
41
42
43
»

Содержание INT40G2SR44












































Отзывы:

Нет отзывов

Похожие инструкции для INT40G2SR44

Бренд: Octavo Страницы: 28

Бренд: Obihai Страницы: 2

Бренд: Amperes Страницы: 8

EK-FC1080 GTX Ti TF6

Бренд: ekwb Страницы: 2

Бренд: H3C Страницы: 77

X-Pedition 2000

Бренд: Enterasys Страницы: 86

StorageWorks AIT 35GB AutoLoader

Бренд: Compaq Страницы: 4

Бренд: AMX Страницы: 1

Бренд: Kontron Страницы: 62

Emulation Memory Board R0E330850MSRC0

Бренд: Renesas Страницы: 4

Бренд: Cooler Master Страницы: 4

Бренд: Transition Networks Страницы: 5

Macho Rev. A (BW)

Бренд: Thermalright Страницы: 32

Бренд: WiebeTech Страницы: 8

Бренд: Cabletron Systems Страницы: 56

ControlCenter-IP 2.0

Бренд: G&D Страницы: 60

Бренд: ZyXEL Communications Страницы: 114

PowerForce G4 '47

Бренд: PowerLogix Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды