manualshive.com logo in svg

Garland INT40G2-44, Руководство пользователя

Поделиться
Скачать
Garland INT40G2-44 Скачать руководство пользователя страница 14

Packet Broker

EdgeLens Inline Security Packet Broker | INT40G2XR44 | 1.19.5

2.9 Import Configuration

This option allows a previously created configuration file (exportCfg.json) to be uploaded to the unit. The

Chassis Model is the only option that is considered and must match, otherwise, the unit will reject the
exportCfg.json file.

1. Select Import Configuration.

The Import Configuration panel will be displayed.

2. Select Choose File.

3. Select the desired exportCfg.json file.

4. Select Open.

5. Select Upload.

The unit will automatically verify the selected exportCfg.json file.

6. Select Configure.

The unit will import and load the exportCfg.json. An “import done” message will be displayed

when complete. A reboot is not required.

2.10 Software Upgrade

This option allows the unit’s firmware to be upgraded. The existing unit configuration will not be affected
and maintained during the upgrade. It may be required to refresh or restart the web browser after the
firmware upgrade is complete.

1. Select Software Upgrade.

The Update Firmware panel will be displayed.

2. Select Choose File.

3. Select the desired firmware file.

4. Select Open.

The new firmware file will be displayed.

5. Select Upload.

The unit will validate the firmware file.

The unit will install the firmware file.

The unit will reboot.

6. After the upgrade is complete. The GUI will refresh to the Login panel.

Garland Technology  |  716.242.8500  | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.

13

Содержание INT40G2-44

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды