Packet Broker
EdgeLens Inline Security Packet Broker | INT40G2XR44 | 1.19.5
2.7 SNMP
The following configuration options may be displayed, modified, enabled, or disabled.
V2 Read/Write
V2 read Only
V3 MD5/DES
V3 SHA/AES
Access Port
Access Port
Access Port
Access Port
Trap Port
Trap Port
Trap Port
Trap Port
Trap IP AddressTrap IP AddressTrap IP AddressTrap IP Address
Community Password Community Password User
User
Auth Password
Auth Password
Priv Password
Priv Password
1. Select SNMP.
The SNMP Configuration panel will be displayed with the current configuration.
2. Select Edit Configuration.
The SNMP Configuration panel will be displayed.
3. Select Enable SNMP Config.
4. Enable, disable or modify the desired options.
5. Select Save to save updates.
6. Select Cancel to return the Syslog Configuration panel.
7. SNMP Test may be selected to send a test trap to the server.
2.8 Export Configuration
This option creates a configuration file (exportCfg.json) that may be used to recover a unit. The
exportCfg.json file may be renamed if desired. The exportCfg.json file does not contain Usernames,
Passwords, Groups, or Network Settings.
1. Select Export Configuration.
The Export Configuration panel will be displayed.
2. Select Export.
The exportCfg.json file will be downloaded to the default download destination of the browser.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
12
