Packet Broker
EdgeLens Inline Security Packet Broker | INT40G2XR44 | 1.19.5
2.4 Network Settings
The following configuration options may be displayed, modified, enabled, or disabled.
Any change made
to any network, setting option could cause network connectivity disruption for about 60 seconds.
DHCP
IP Address
Mask
Gateway
DNS 1
DNS 2
SSL Certificate Loaded
Using Uploaded SSL Certificate
1. Select Network Settings. The Network Settings panel will be displayed with the current configuration.
2. Select Edit Settings. The Network Settings panel will appear.
3. Enable, disable or modify the desired options.
4. Enable or disable Using Uploaded SSL Certificate.
This option may be enabled if an SSL cert.pem and key.pem files have been uploaded to the unit
using the Add SSL Certificate option on the Network Settings panel.
5. Select Save to save updates.
6. Select Cancel to return the Network Settings panel.
7. Add SSL Certificate.
Uploading a custom SSL certificate involves two files. The cert.pem file and key.pem file.
The unit will consider these files during the upload. If the files do not match or one of the
files are corrupted, the unit will abort the upload. The Result Messages will be displayed
in the GUI. Adding an SSL certificate will cause the GUI to restart. This could take up to
90 seconds. It may be required to refresh or restart the web browser.
8. Select Add SSL Certificate.
The Select Certificate and Select Key File panel will appear.
9. Select Choose File for Select Certificate.
10. Select the desired cert.pem file.
11. Select Open.
12. Select the Choose File for Select Key File.
13. Select the desired key.pem file.
14. Select Open.
15. Select Upload.
16. Select Restart Import to select a different cert.pem or key.pem file.
17. Select Cancel to return to the Network Settings panel
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
10
