Packet Broker
EdgeLens Inline Security Packet Broker | INT40G2XR44 | 1.19.5
2.3.3 Authentication
Authentication allows for two options, Local or TACACS. Local or TACACS Authentication may be
enabled or disabled independently and at least one option must be enabled.
1. Select Authentication Settings.
The Authentication Settings panel will be displayed. Local Authentication is enabled by default.
2. Select TACACS Authentication to enable.
3. Enter the TACACS Server IP Address.
4. Enter the TACACS Server Secret Word, optional.
5. Select Save to save updates.
6. Select Cancel to return the Admin Settings panel.
7. TACACS Test
This option may be used to verify the authentication of a TACACS user and password. The
TACACS Test option will be active only if TACACS Authentication has been enabled.
The TACACS Test panel will appear.
7.1 Enter the Username.
7.2 Enter the Password.
7.3 Select Test.
The GUI will display the results of the authentication of the user and the password entered.
8. TACACS Ping
This option may be used to verify the network connectivity from the unit to the TACACS server.
The TACACS Ping option will be active only if TACACS authentication has been enabled.
The GUI will display the results of the ping test.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
9
